Fiberglass Bathtub Enclosure Reglazing in Culver City, CA
Yellowed, cracked or chalky fiberglass and acrylic tub-shower enclosures repaired and recoated in place. The alternative is cutting the unit out and opening up your walls.
The Smart Fix for Condo and Apartment Bathrooms
Fox Hills condos, the apartment buildings along Sepulveda and Washington, and newer townhomes near Playa Vista were largely built with molded fiberglass or acrylic tub-shower enclosures. They are light and watertight when new, but after 15–30 years the gelcoat dulls and yellows, the floor flexes and cracks, and stains stop coming out.
Because these units go in before the drywall, replacement is a construction project: the enclosure is cut apart, the walls are opened, and a plumber and drywall contractor are needed before the new unit can go in. Reglazing repairs and refinishes the existing enclosure in a single day, which is why Culver City property managers call us first.
- One-piece and multi-piece fiberglass and acrylic units
- Soft or cracked floors reinforced and repaired
- Spider cracks, holes and chips fixed
- Yellowed or chalky gelcoat restored to gloss
- Color change to bright white
- No drywall, framing or plumbing work
How We Repair and Reglaze Fiberglass Enclosures
Fiberglass needs a different prep than porcelain. Here is what makes our enclosure work last.
Floor reinforcement
If the tub floor flexes underfoot, we drill small access holes and inject an expanding structural foam or resin to support the base, then seal the holes. A reglazed floor that still flexes will crack, so we never skip this.
Fiberglass repair
Cracks and holes are ground out, filled with fiberglass cloth and resin, and sanded smooth. Repairs are invisible once coated.
Gelcoat preparation
The entire unit is scuff-sanded and chemically cleaned, then primed with an adhesion promoter designed for fiberglass and acrylic.
Finish
Three to four sprayed coats of urethane give the walls, tub and floor a uniform high-gloss finish. An optional non-slip texture can be added to the tub floor. Ready for use in 24 hours.
This service is covered by our 2-year written warranty against peeling, bubbling and adhesion failure. Kitchen sinks are the one exception: they carry a 6-month warranty because of the heavy daily use they take. Full terms are on our Terms of Service page.
What Fiberglass Enclosure Reglazing Costs in Culver City
Replacing means demolition, disposal, a plumber, possibly a Culver City building permit, and days without a working bathroom. Reglazing restores the surface you already own in one visit.
| Reglazing | Full Replacement | |
|---|---|---|
| Typical cost | $700 – $1,300 | $3,000 – $8,000+ |
| Time on site | Hours | 2–5 days |
| Demolition & dust | None | Yes |
| Plumbing / permit | Not required | Often required |
| Typical savings | Up to 80% less than replacing | |
Ranges reflect typical Westside Los Angeles projects and are for guidance only. Every job is quoted individually after we see the surface.
See the Full Savings Breakdown
Enclosure Reglazing in Four Simple Steps
Free quote
Send photos through our quote form or call. Most Culver City quotes go out the same day.
Protect & prep
We mask the room, strip old coatings, repair chips and cracks, and etch the surface so the new finish bonds permanently.
Spray the new finish
Multiple coats of a commercial-grade, low-VOC urethane are applied with a fine-finish spray system for a smooth, glossy result.
Cure & enjoy
The surface is ready for normal use in 24 hours. We leave the space clean and walk you through simple care.
Fiberglass enclosure reglazing Across Every Culver City Neighborhood
We are based in Culver City (ZIP codes 90230 and 90232) and schedule most local jobs within a few days.
Culver City neighborhoods we serve
- Blair Hills
- Blanco / Culver Crest
- Carlson Park
- Clarkdale
- Culver West
- Downtown Culver City
- Fox Hills
- Hayden Tract
- Jefferson
- Lindberg Park
- Lucerne-Higuera
- McManus
- Park East
- Park West
- Rancho Higuera
- Studio Village
- Sunkist Park
- Veterans Park
- Washington Culver
Nearby Westside communities
- Mar Vista
- Palms
- Playa Vista
- Westchester
- Marina del Rey
- Del Rey
- Cheviot Hills
- Baldwin Hills
- Ladera Heights
- Beverlywood
- West Los Angeles
- Venice
Fiberglass Enclosure Reglazing FAQs
What is a fiberglass bathtub enclosure?
A one-piece or multi-piece molded unit that combines the tub and the surrounding walls, usually fiberglass or acrylic over a fiberglass backing. They are common in Culver City condos, apartments and 1970s–90s homes, and in additions and ADUs.
Can a cracked fiberglass tub floor be fixed?
Yes. Soft or cracked floors are the most common fiberglass problem. We inject a structural filler to firm up the base, repair the crack with fiberglass and resin, then reglaze the whole unit so the repair is invisible.
Why not just replace the enclosure?
One-piece enclosures are installed before the walls are finished, so removing one usually means cutting it into pieces, opening up drywall, and sometimes reframing the alcove. Reglazing avoids all of that and costs a fraction as much.
Does the finish hold up on fiberglass and acrylic?
Yes, when the gelcoat is properly sanded and primed. Our coating is formulated for fiberglass and acrylic and is backed by the same 2-year warranty as our cast iron tub work.
Can you change the color of a fiberglass enclosure?
Yes. Almond, bone, harvest gold and dark blue enclosures are routinely updated to bright white.
How long does it take?
Most enclosures take one day on site, including crack repair. The unit is ready for use 24 hours after we finish.
Other Reglazing Services in Culver City
Doing more than one surface on the same visit is the most cost-effective way to update a whole bathroom.
Bathtub Reglazing
Chipped, stained or dated tubs restored to a glossy, like-new finish in a single visit.
Learn moreSink Reglazing
Bathroom and kitchen sinks refinished in the color you want, with no plumbing changes.
Learn moreShower Reglazing
Shower pans, walls and surrounds sealed into one smooth, mildew-resistant surface.
Learn moreTile Walls & Floors Reglazing
Pink, mint and yellow mid-century tile updated to a modern color without demolition.
Learn moreDon't Tear Out the Walls. Reglaze the Enclosure.
Crack repair and refinishing in one visit, backed by a 2-year warranty. Quotes from photos within one business day.